HP Officejet 3830 Printer Setup

Quick HP Officejet 3830 Printer Unboxing and Setup Guide

The 123.hp.com/oj3830 provides you with print, copy, scan, and fax operations. It has a 4-ink system with an input tray that can hold up to 60 sheets at a time. You can connect it to the computer with the help of a wired or wireless connection. The setup and installation process will be very easy if you follow the steps given here.

• Firstly, observe the seal of the 123.hp.com/setup 3830 printer package.

• If it is not intact, then you should replace it with a new 123 HP Officejet 3830 printer.

• Else, open the seal of the package using a knife.

• Do not forget to verify if the additional accessories such as power cord, USB cable, warranty card, setup guide, and ink cartridges are available in the package.

• Keep it aside and take the HP Officejet 3830 setup printer out of the box.

• Discard the styrofoam sheets present around it and remove the plastic wrap.

• Place it on a steady surface and peel the blue tapes that are outside and inside the printer.

• Take the power cord and insert one end to the printer. The other end should be attached to the power supply.

• Turn on the 123.hp.com/setup 3830 printer using the Power button.

• Set the preferences in the succeeding screen.

• Pull the cartridge access door and wait until the carriage stops moving.

• Unpack the new cartridges provided and insert it in the respective slots. Close the access door.

• Load plain papers in the input tray after aligning them on a flat surface. Take a test print.

• Next, download the drivers necessary and install them on the computer to connect it to your 123.hp.com/oj3830 printer.

   

Free HP Officejet Pro 8710 Driver Download for Windows

The user should wait till the carriage shifts to the center, turns idle, and remains silent. The ink tanks are differentiated by specific colors. The black colored ink tank cover is for the black cartridge and the colored ink tank is for the tri-color cartridge.

The ink cartridge should be removed from the package, and then inserted into its designated slot. It is suggested that one has to go through the safety measures before starting the ink cartridge installation. After installing both the cartridges, do not forget to close the ink cartridge access door.

Finally, its the correct time to download and install the HP Officejet Pro 8710 driver software. The device is accompanied by a driver installation disc that is used to install the HP Officejet Pro 8710 software by burning the files on it. The HP Officejet Pro 8710 driver software is also available on this site. In case of misplaced or lost discs, the driver files can be downloaded and installed manually directly by using the download link provided on this site.

First Time HP Officejet Pro 8710 Printer Setup For Mac

When the printer is turned on for the first time, the device prompts the user to choose the preferences like Country, Region, Language, Time, and Date of the user. The preferences can be set as per the user’s wish.

One can adjust the preferences by using the touch display and navigating through the settings. Even though the printer has some buttons on it, the commands can be directly given on the touch display. Next step involved is loading paper into the main input tray. The input tray of the HP Officejet Pro 8710 is built on the front side at the bottom of the printer. The tray should be pulled outwards to load the papers. The paper guides can be extended so that the papers can be loaded easily.

It is advised that the input tray should not be overloaded under any circumstances. While loading the papers, remember to load the papers of appropriate size and quality. The plain U.S. letter or A4 papers are most widely used. The input tray can be pushed into the tray after loading the papers. Then, we should move to an important step involved, which is, the installation of ink cartridges.

HP Envy Photo 7158 First Time Printer Setup

This document is about HP Envy Photo 7158 First Time Printer Setup

Steps to Follow for First Time Printer Setup

Step 1: Remove the printer from the box
Step 2: Connect the power cord and set your preferences
Step 3: Install the ink cartridges
Step 4: Load paper into the main input tray
Step 5: Install the printer software

Step 1: Remove the printer from the box

• The first steps for HP Envy Photo 7158 First Time Printer Setup is have to remove the printer from the packed box
• Then remove all the tapes carefully and packing materials from the outside of the printer, and then remove the sticker from the printer control panel.
• Lift the scanner lid, remove the packing material from the scanner glass, and then close the scanner lid.
• Gently grasp the handles on either side of the printer, raise the ink cartridge access door until it locks into place, and then remove all tape and packing material from the printer.
• Now Close the ink cartridge access door.
• Recycle the packing materials.

Step 2:Connect the power cord and set your preferences

• Connect the power cable to the rear of the printer, and then plug the other end of the power cable into an electrical outlet.
• Switch on the printer.
• To set your preferences on the printer control panel, Select your preferred language and country or region, and then give Yes to confirm your choices.
• Now you get a welcome screen displays on the printer control panel.
• Next you continue with ink cartridges installation

Step 3: Install the ink cartridges

• Now Install the HP ink cartridges that shipped in the box with your printer.
  Then open the ink cartridge access door.
• Have to wait until the carriage is idle and silent before you continue.
• Remove one of the ink cartridges from its package. Be careful to touch the black plastic on the ink cartridge

Step 4: Load paper into the main input tray

• Remove packing material and tape from the input and photo trays, and then load unused A4 paper(for Test) in the input tray.
• First Pull and open the input tray and then remove the output tray, Now remove all tape and packing materials from the photo tray.
• With the paper tray pulled out, push in the photo tray.
• Then Remove all tape and packing materials from inside the input tray.
  Slide out the paper guides as far as possible.
• Load paper in portrait orientation with the print side facing down, and then push the stack into the tray until it stops.
• Slide the paper guides until they touch the edge of the stack of paper.
• Do not push the guides in so tightly that they bind against the paper.
• Replace the output tray on the paper tray, and then push in the input tray until it locks into place.
• The printer starts an initialization process. It is normal for the printer to make noises during this process. After the process completes, the printer prints a calibration page.
• Recycle all packing materials.

Step 5: Install the printer software

Your HP printer hardware is now set up and you can install the printing software. Do not attempt to connect the printer to a computer until instructed to do so in the printing software.

For More HP Envy Photo 7158 Printer Guidelines Contact Our Technical Support Team 1 888 249 8496 (Toll Free)